Water Saving Tips
You can save precious water with a few simple steps around your pool
- Use a pool cover. It will reduce water loss due to normal evaporation. The cover can also reduce heating bills by preventing night heat loss and will save on chemicals too. Make certain that it fits properly. The cover is the number one water and fossil fuel conservation device! A recent study found that pool covers can reduce swimming pool water use by nearly 30% (Maddaus and Mayer, 2001)
- Repair any swimming pool leaks. Even a small leak in either pool equipment or the pool's structure represents a substantial waste. In fact, an inch-a-day leak in a 15-by-30-foot pool can waste approximately 102,000 gallons per year!
- If heated, reduce your pool and spa water temperature. Warmer water evaporates more quickly.
- Shut down unnecessary fountains and waterfalls. The effect of aeration loses a significant amount of water to evaporation.
- Manually clean your filter. You'll do a more thorough job and use less water. The average backwash uses between 250 to 1,000 gallons of water -- without completely cleaning your filter!
- Prohibit diving, splashing and water fights in your pool and spa. Boisterous play causes inordinate amounts of water loss due to splash-out.
- Maintain proper chemical levels and adequate circulation time. Not only will your pool water be safer and cleaner, but you'll avoid the need to drain your pool or use excessive water to correct conditions of neglect.
- When you are filling your pool, be sure to keep an eye on your water level. Forgetting to shut off fill water can make for a costly waste of water.
- Plug the overflow line when the pool is in use. Keep the pool water in the pool.
- Turn off the tile-spray device on your automatic pool cleaner. Its splashing invites evaporation losses, and overspraying can send water right out of the pool! A good deal of that spray evaporates before it hits the tile.
- Reevaluate the frequency of backwashing if your pool has no separation tank. Most people backwash more frequently than necessary. This wastes water. Some pool filters do not have to be backwashed at all; they can be taken apart and cleaned, even though this process is less convenient.
Your savings will vary depending upon your specific swimming pool and situation, but by implementing a few simple water efficiency measures it should be possible to save a substantial amount of water in your swimming pool.