Bath Kitchen Laundry Garage/Basement Landscaping Landscaping Pool/Spa Water Meter Patio


 Best Ways to Save & Drought Tips
 Water Use
 Water Savings
 Wastewater Savings
 Energy Savings
 Benefits & Costs
 Environmental Benefits
 Regulations & Policies
 Future Trends
 Purchase Tips
 Where to Get
 Incentives or Rebates
 Installation Tips


Help Me

Showerhead Water Savings

Replacing your current showerhead with a new model that uses 2.5 gallons per minute (gpm) may or may not save water in your home. Many people already have a 2.5 gpm (or less) showerhead installed and others throttle their shower down to a flow rate below 2.5 gpm out of personal preference. The national average showering flow rate was measured to be 2.22 gpm (Mayer, et. al. 1999).

Nevertheless, installing a new showerhead is still a good idea and can result in water savings, particularly if you live in an older house and have what appears to be an older showerhead. Showerheads are inexpensive (starting at less than $5) and can be a good way to save water in your home.

With an on/off switch, you can turn off the water while you soap, shampoo, or shave without losing your water temperature.
Photo source: Aquacraft, Inc. by permission.

If you are looking for further water savings in the shower, consider taking shorter showers. If your showerhead uses 2.5 gpm, then you can save 2.5 gallons of water for every minute you reduce you showering. Consider placing a bucket or plastic basin in the shower with you to collect excess water. This water can then be used to water plants outdoors.

The Niagara Conservation Shower Coach can help you to take shorter showers. Photo source: City of Roanoke, VA
Accessed September 5, 2003, by permission.

© Copyright 2009, California Urban Water Conservation Council, All Rights Reserved

contact webmaster